Shogun-motorsports Honda CBR600RR (07-12) Frame Slider Instrukcja Użytkownika Pobierz pdf

HondaCBR600RR (07-12) Frame Slider

Installation Instructions

Part Numbers: 750-3320, 750-3329, 750-3349,

750-3340, 755-3349& 850-3340

MADE IN THE USA!

Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this

product. Do not try to install this product without proper tools, recently calibrated torque wrench,

correct torque specifications from factory service manual, safety goggles and gloves.The motorcycle

must be in a fixed secure position before the install process begins. DO NOT remove both engine studs

at the same time. Shogun is not responsible for any part of your motorcycle for any reason.Precisely

measure location of cut and if in doubt at any point please call us before the install process has begun.

Replacement Parts List: Left Side Components (as if you were sitting on the bike)

QTY Price each Part Numbers Descriptions

1 $20.00 99-FS-750-3329-L Black Left Side Puck

1 $20.00 99-FS-750-3320-L White Left Side Puck

1 $25.00 99-FS-850-3320-L Chrome Left Side Puck

1 $5.50 99-HB-SH12125090 Socket Cap 12 X 1.25 X 90 Main Engine Stud

Replacement Parts List: Right Side Components (as if you were sitting on the bike)

1 $20.00 99-FS-750-3329-R Black Right Side Puck

1 $20.00 99-FS-750-3320-R White Right Side Puck

1 $25.00 99-FS-850-3320-R Chrome Right Side Puck

1 $5.50 99-HB-SH12125090 Socket Cap 12 X 1.25 X 90 Main Engine Stud

Frame Sliders: Left longer than right, bolts same left and right 12 X 1.25 X 90mm.

Installation Steps apply to left and right hand side.

1. Some photos in this section are used for illustration examples only. It is up to you how you

decide to cut your motorcycles bodywork to accept the frame slider there are many different

ways customers go through this process. Shogun is not responsible for any part of your

motorcycle for any reason. Precisely measure location of cut and if in doubt at any point please

call us before the install process has begun.Professional installation is recommended. Always

use proper safety measures during the install of this product. Do not try to install this product

without proper tools, recently calibrated torque wrench, correct torque specifications from

factory service manual, safety goggles and gloves.

2. Locating and cutting the body. This is a simple illustration of how most of us install the product

here. It takes a bit longer but our end results have been more consistent with a better overall fit

and finish. We start with (99-SPOT-1212560) Shogun Spot tool. It’s nothing special just a 12mm

socket cap bolt with a 1.25 pitch that we cut the head off of and sharpen to a point. You can

purchase the tool for $12.99 or go to your local hardware store and make your own. Keep in

1 2 3 4 5 6 7

Installation Instructions 1

Podsumowanie treści

Strona 1 - Installation Instructions

HondaCBR600RR (07-12) Frame Slider Installation Instructions Part Numbers: 750-3320, 750-3329, 750-3349, 750-3340, 755-3349& 850-3340 MADE IN THE

Strona 2

mind Metric 10 or 12mm X 1.25 pitch bolts (most common sportbike engine studs) are fairly hard to find. Make sure you know the size and that the bolt

Strona 3

Strona 4

4. Remove the bodywork and double check location of spot mark the tool has created. 5. Body Prep. Use masking tape to completely mask off the are

Strona 5

Strona 6

6. Using a small drill 1/8 inch or so drill a pilot hole in the body(see above photo). Remount bodywork and double check the hole location with the s

Strona 7

8. For this application we used a step drill to open the hole big enough for a dremel tool with a sanding roll and opened up the hole little by littl

Komentarze do niniejszej Instrukcji

Brak uwag

Shogun-motorsports Honda CBR600RR (07-12) Frame Slider Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Do motocykli Shogun-motorsports Honda CBR600RR (07-12) Frame Slider. Shogun Motorsports Honda CBR600RR (07-12) Frame Slider User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Do motocykli Shogun-motorsports Honda CBR600RR (07-12) Frame Slider