Shogun-motorsports Suzuki GSXR1000 (12-13) Frame Slider Instrukcja Użytkownika Pobierz pdf

Suzuki GSXR1000 12-13 Frame Slider

Installation Instructions

Part Numbers: 750-5359, 755-5359, 750-5350

MADE IN THE USA!

Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this

product. Do not try to install this product without proper tools, recently calibrated torque wrench,

correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle

must be in a fixed secure position before the install process begins. DO NOT remove both engine studs

at the same time. Shogun is not responsible for any part of your motorcycle for any reason. Precisely

measure location of cut and if in doubt at any point please call us before the install process has begun.

Replacement Parts List: Left Side Components (as if you were sitting on the bike)

QTY Price each Part Numbers Descriptions

1 $20.00 99-FS-750-5359-L Black Left Side Puck

1 $20.00 99-FS-750-5350-L White Left Side Puck

1 $3.50 99-HB-SH10125090 Socket Cap 10 X 1.25 X 90 Main Engine Stud

Replacement Parts List: Right Side Components (as if you were sitting on the bike)

1 $20.00 99-FS-750-5359-R Black Right Side Puck

1 $20.00 99-FS-750-5350-R White Right Side Puck

1 $3.50 99-HB-SH10125090 Socket Cap 10 X 1.25 X 90 Main Engine Stud

Frame Sliders: Left side slider is longer than right side.

Some photos in this section are used for illustration examples only.

Installation Steps:

1. Start with the left side body work first. Remove the left side panel.

2. Locate the left side engine stud and remove bolt. (arrow below is pointing to bolt location)

3. Body Prep. Use masking tape to completely mask off the area on the body where you will be

working. We usually will tape off approximately 6 to 8 inches around the though hole area and

any other edges that could get bumped or scratched while working. Tip: In some locations you

may want to double up the thickness of the masking take to give extra protection.

1 2 3 4

Installation Instructions 1

Podsumowanie treści

Strona 1 - Installation Instructions

Suzuki GSXR1000 12-13 Frame Slider Installation Instructions Part Numbers: 750-5359, 755-5359, 750-5350 MADE IN THE USA! Carefully read instructions i

Strona 2

4. Locating and cutting the body. This is a simple illustration of how most of us install the product here. It takes a bit longer but our end resu

Strona 3

7. Using a small drill ¼ inch or so drill a pilot hole in the body from the inside out. Remount bodywork and double check the hole location with the

Strona 4

READ CAREFULLY Shogun cannot guarantee that they will protect your motorcycle from any extent of damage. Shogun frame sliders are really meant to help

Komentarze do niniejszej Instrukcji

Brak uwag

Shogun-motorsports Suzuki GSXR1000 (12-13) Frame Slider Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Do motocykli Shogun-motorsports Suzuki GSXR1000 (12-13) Frame Slider. Shogun Motorsports Suzuki GSXR1000 (12-13) Frame Slider User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Do motocykli Shogun-motorsports Suzuki GSXR1000 (12-13) Frame Slider