Shogun-motorsports DMP Slingshot Tire Warmers Digital Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Do motocykli Shogun-motorsports DMP Slingshot Tire Warmers Digital. Shogun Motorsports DMP Slingshot Tire Warmers Digital User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 2
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
DMP Slingshot Standard & Digital Tire Warmer
Part Numbers: 210-
1010 & 210
Carefully read instructions in their entirety before
DMP Slingshot tire warmers are sized to fit a 120mm width 17” front
width 17” rear race
tire. DMP Slingshot tire warmers are also compatible with 16.5” series
tires.
This product is intended only for DOT RACE TIRES and RACE SLICKS.
Standard tire warmer set (PN# 210
warmer set (PN# 210-
1031) include
each tire warmer.
Power draw for front warmer is approx. 450W and rear warmer draws approx. 550W. These
warmers must be used with a proper
1.
Install front and rear tire warmers using high strength Velcro straps supplied on the warmer by
carefully pulling the warmer element over the tire. Tires
and rear stands.
Bunching, overlapping, or folding over heated areas of the warmer may cause
overheating and damage the warmer!
DMP Slingshot Standard & Digital Tire Warmer
Instructions
-1031
Carefully read instructions in their entirety before
usage!
DMP Slingshot tire warmers are sized to fit a 120mm width 17” front
race
tire and 180
tire. DMP Slingshot tire warmers are also compatible with 16.5” series
This product is intended only for DOT RACE TIRES and RACE SLICKS.
Standard tire warmer set (PN# 210
-1010) includes a front and rear t
ire warmer. Digital tire
1031) include
s
front and rear tire warmer with a digital control box on
Power draw for front warmer is approx. 450W and rear warmer draws approx. 550W. These
warmers must be used with a proper
power supply in order to effectively heat cycle.
Install front and rear tire warmers using high strength Velcro straps supplied on the warmer by
carefully pulling the warmer element over the tire. Tires
must
be properly elevated
Bunching, overlapping, or folding over heated areas of the warmer may cause
overheating and damage the warmer!
tire and 180
-200mm
tire. DMP Slingshot tire warmers are also compatible with 16.5” series
race
ire warmer. Digital tire
front and rear tire warmer with a digital control box on
Power draw for front warmer is approx. 450W and rear warmer draws approx. 550W. These
power supply in order to effectively heat cycle.
Install front and rear tire warmers using high strength Velcro straps supplied on the warmer by
be properly elevated
using front
Bunching, overlapping, or folding over heated areas of the warmer may cause
Przeglądanie stron 0
1 2

Podsumowanie treści

Strona 1

DMP Slingshot Standard & Digital Tire WarmerPart Numbers: 210-1010 & 210Carefully read instructions in their entirety before • DMP Slingshot

Strona 2

2. Plug power cord for each warmer into power source. Once the tire warmer is plugged in, the tire warmer is ON and will begin to heat cycle. Use a s

Komentarze do niniejszej Instrukcji

Brak uwag